Operation Manual

Set-up
Operating manual 275 Version 01.0 - 01/201670
6.7 Setting the working height
The working height is continuously adjustable between 750 and
900 mm (clearance between the floor and upper edge of the table
plate).
Figure 40: Setting the working height
1. Loosen all four screws (1) on the head sections.
2. Set the table plate to the desired height.
Important: Pull out or push in the table plate evenly at both
sides to prevent it from jamming.
3. Tighten the screws (1) on the head sections.
(1) - Screws
①
①