Operation Manual

Set-up
Operating manual 275 Version 01.0 - 01/2016 69
6.6.1 Fitting the thread stands
Figure 39: Fitting the thread stands
1. Insert the thread stand (1) into the hole.
2. Fasten the thread stand (1) with nut and washer.
3. Screw the thread reel holder (3 and the unwinding bracket (2)
onto the thread stands (1) in such a way that they are exactly
parallel above each other.
(1) - Thread stand
(2) - Unwinding bracket
(3) - Thread reel holder
①
②
③