Operation Manual

Set-up

Operating manual 275 Version 01.0 - 01/201664

Standard equipment:

• Upper part of machine (1)

• Oil pan (not illustrated) - in the accessory kit

• Thread stands with unwinding bracket (9) - in the accessory

kit

• Controller (8)

• Control panel for the controller (not illustrated)

• Setpoint device (6) with rod

• Pedal (5) with rod

• Small parts in an accessory pack

Optional additional equipment:

• Table plate (2)

•Drawer(3)

• Frame (4)

• Pneumatic maintenance unit (7)

• DAC mini controller with control panel (not illustrated)

6.2 Removing the transport securing devices

All transport securing devices must be removed prior to set-up.

1. Remove the lashing straps and wooden blocks from the

machine upper section, the table, and the frame.

2. Remove the supporting wedges between the machine arm

and needle plate.