Operation Manual

Operation
Operating manual 275 Version 01.0 - 01/2016 57
Sewing a multiple width with a DAC mini
 Section 5.17 Multiple width control using the DAC mini, page 45
Sew an intermediate bartack
1. Activate the manual reverse sewing key ( page 51).
The machine sews in reverse while the key is pressed.
The speed is determined by the pedal.
AT THE END OF THE SEAM
Finish the seam
Without end bartack:
1. Activate the bartack toggle key ( page 51).
With end bartack:
2. Press the foot pedal fully back to pedal position -2 and hold it
in this position.
The thread is cut.
The machine stops.
The needle and needle foot are raised.
3. Remove the sewn material.