Operation Manual

Operation
Operating manual 275 Version 01.0 - 01/2016 55
5.20 Sewing
The foot pedal starts and controls the sewing process.
Figure 29: Sewing with the foot pedal
The following settings are assumed in the subsequent sewing
descriptions:
• Start and end bartacks are generally switched on.
• The sewing foot position is down before and after cutting.
• The needle position is down before cutting.
• The last seam ends with an end bartack and thread cutting.
SEWING START
Initial situation
1. Switch on the sewing machine.
2. Pedal position 0:
Machine stationary, needles up, sewing foot down.
Risk of injury from the needle tip when sewing
is started unintentionally.
Take care not to accidentally press the foot pedal
when your fingers are in the needle tip area.
WARNING
(1) - Pedal position +1:
sewing active
(2) - Pedal position 0:
rest position
(3) - Pedal position -1:
moves the sewing foot up
(4) - Pedal position -2:
sewing the final bartack and
cutting off the thread
①
②
④
③