Operation Manual

Operation
Operating manual 275 Version 01.0 - 01/2016 51
5.18Keypad on the machine arm
A keypad is located on the machine arm, which is equipped with
different keys depending on the subclass and installed equipment.
Figure 27: Keypad variants
Element Function/Meaning
Bartack toggle
When bartacking is generally switched on then this key
switches off the next bartack.
When bartacking is generally switched off then this key
switches on the next bartack.
Setting the needle to the high/low positions
The procedure for setting the position is described in
the controller
 Operating Manual.
Manual reverse sewing
The machine sews in reverse while the key is pressed.
Edge cutter
Switch the edge cutter on and off
Multiple width
Switch additional multiple widths on and off
Yellow LED Lights up when a function is activated
Green LED Lights up when the sewing drive is switched on.
(1) - Additional equipment
①