Operation Manual

Operation
Operating manual 275 Version 01.0 - 01/2016 47
5.17.1 Smooth sewing
1. Press the = key for smooth sewing.
 The green LED above the key lights up.
The display shows the current upper transport length.
The upper transport length can be adjusted using the Plus/Minus
keys if the sewing results are not satisfactory. The changed setting
of the upper transport length is stored immediately.
5.17.2 Sewing with multiple widths
1. Deactivate all sequence keys that are not required:
To do this, press the corresponding sequence key and the
(De-) Activation key ( page 46) at the same time.
 The red LEDs above the deactivated keys light up.
If the key for the desired sequence is deactivated (red LED is lit):
2. Activate the key for the desired sequence:
To do this, press the desired sequence key and the
(De-) Activation key ( page 46) at the same time.
 The red LED goes out. The key is activated.
3. Press the key for the desired sequence.
 The green LED above the key lights up.
The display shows the upper transport value for this
sequence.
The upper transport length can be adjusted using the Plus/Minus
keys if the sewing results are not satisfactory. The changed setting
of the upper transport length is stored immediately.