Operation Manual

Operation
Operating manual 275 Version 01.0 - 01/201642
5.15 Locking the sewing foot in place in the
upper position
The button on the machine head can be used to hold the lifted
sewing foot in the upper position, e. g. in order to wind on the hook
thread.
Figure 23: Locking the sewing foot in the raised position
Locking the sewing foot in the raised position
1. Raise the sewing foot with the knee lever or pedal.
( Section 5.14 Lifting the sewing foot, page 41)
2. Press the locking button (1).
3. Release the knee lever or pedal.
The sewing foot is locked in place in the upper position.
Removing the lock
1. Press the lever to the right again or press the pedal halfway
back.
The sewing foot is lowered. The locking mechanism is
removed.
①
(1) - Locking button
Risk of crushing when lowering the sewing foot.
Do not put your hands underneath the sewing foot
if the locking mechanism is removed.
CAUTION