Operation Manual

Operation

Operating manual 275 Version 01.0 - 01/2016 41

5.14 Lifting the sewing foot

The sewing foot can be lifted mechanically using the knee lever

(additional equipment) or electromagnetically using the foot pedal

to insert or move the material being sewn.

Figure 22: Lifting the sewing foot using the knee lever

Lifting the sewing foot using the knee lever

1. Push the knee lever (1) to the right.

The sewing foot is lifted and stays up for as long as the

knee lever is pressed.

Lifting the sewing foot using the foot pedal

1. Press the foot pedal (2) halfway back.

The sewing foot is raised and remains raised while the

pedal is held in position.

At the end of the seam:

1. Press the foot pedal (2) fully back.

The sewing foot is raised and the thread cutter is

activated.

Lowering the sewing foot

1. Release the knee lever (1) or return the pedal (2) back to the

neutral position.

The sewing foot is lowered.

(1) - Knee lever (2) - Pedal

①

②

Risk of crushing when lowering the sewing foot.

Do not put your hands underneath the lifted sewing

foot.

CAUTION