Operation Manual

Table of contents
Operating manual 275 Version 01.0 - 01/20162
5.17 Multiple width control using the DAC mini .............. 45
5.17.1 Smooth sewing ....................................................... 47
5.17.2 Sewing with multiple widths.................................... 47
5.17.3 Changing between smooth sewing and
a single multiple width............................................. 48
5.17.4 Sewing with up to 8 different multiple widths.......... 48
5.17.5 Alternately sewing left and right parts with
programmed multiple widths................................... 49
5.17.6 Sequence switching via thread cutting ................... 49
5.17.7 Switching the edge cutter on or off ......................... 49
5.17.8 Selecting the program............................................. 50
5.17.9 Creating and changing programs ........................... 50
5.18 Keypad on the machine arm................................... 51
5.19 Operating the controller .......................................... 52
5.19.1 Control panel for the controller ............................... 52
5.20 Sewing.................................................................... 55
5.21 Maintenance ........................................................... 58
5.21.1 Cleaning work......................................................... 58
5.21.2 Oil lubrication.......................................................... 60
5.22 Customer service.................................................... 62
6 Set-up..................................................................... 63
6.1 Checking the scope of delivery............................... 63
6.2 Removing the transport securing devices............... 64
6.3 Fitting the frame components................................. 65
6.4 Completing the table plate...................................... 66
6.5 Fastening the table plate to the frame.................... 67
6.6 Table plate installation with DAC mini .................... 67
6.6.1 Fitting the thread stands......................................... 69
6.7 Setting the working height ...................................... 70
6.8 Inserting the machine upper section....................... 71
6.9 Fitting the controller ................................................ 72
6.10 Fit the pedal and setpoint device............................ 73
6.10.1 Machines without DAC mini.................................... 73
6.10.2 Machines with DAC mini......................................... 74
6.11 Installing the knee switch........................................ 75
6.12 Electrical connection............................................... 76
6.12.1 Checking the mains voltage.................................... 76
6.12.2 Connecting the controller........................................ 76
6.12.3 Establishing equipotential bonding ......................... 77
6.13 Checking the needle positions................................ 78
6.14 Setting the DAC mini multiple width controller........ 79
6.15 Rotating to the reference position........................... 82
6.16 Pneumatic connection ............................................ 83
6.16.1 Fitting the maintenance unit.................................... 83