Operation Manual

Operation
Operating manual 275 Version 01.0 - 01/201626
10. Press the foot pedal forwards.
The machine starts sewing and winds on the hook thread
in the process. When the set filling quantity ( Service
manual) is reached, then the winding process will stop
automatically.
The hook thread is normally wound on when sewing is in progress.
However, you can also wind on the hook thread without sewing,
e.g. if you require a full bobbin in order to start sewing.
Risk of damaging the machine when winding without
material to be sewn.
Lock the sewing foot in place using the button ( Section
5.15 Locking the sewing foot in place in the upper position,
page 42). Take the thread out of the thread lever and the
bobbin capsule out of the hook if you wind on the hook thread
without sewing the material in the process.
ATTENTION