Instruction manual

7.3.3 Meaning of the symbols on the V820 operating panel

Symbol Function Display

C abbreviation for code symbol on when a code is

displayed, e.g. C 1907

D abbreviation for parameter number symbol on when a parameter

number is displayed, e.g. F-111

E program number in teach-in mode symbol on when the program

number of a sewing program

is displayed

F seam-section number in teach-in mode symbol on when a sewing-

program seam-section number

is displayed

G cut-out active symbol flashes on active cut-out

H entry via keys blocked symbol on when entry via

keys is blocked

I error message symbol on (for fault list see

section 7.1.8)

J entering number of stitches in teach-in mode symbol on when the number

of stitches in a seam section

is displayed

K bobbin-thread monitor on symbol flashes when bobbin is

running out only on machines

with a residual-thread monitor

L rpm limit effective symbol on when one of the

possible rpm limits is effective

M * right needle switched off symbol on when right

needle bar is switched off.

only on machines with automatic

needle-bar switch-off

N equalising stitches for light barrier symbol on

O machine running symbol on

P automatic rpm effective symbol on when a seam section

in a sewing program is being

automatically executed

at constant rpm

Q * left needle switched off symbol on when left needle bar

is switched off

only on machines with automatic

needle-bar switch-off

* These functions are not used on class 275.