Instruction manual

Symbol Function Display

B needle up/down no display

or shift function in programming mode

pressing this key executes a needle movement

that can be programmed with parameter 140.

See the parameter list in the Set-up instructions.

this key has a different function in

programming mode. See section 7.2.6

P programming mode on/off parameter number/standard display

See sections 7.2.4 and 7.2.6

E switch from parameter number to parameter number/parameter value

parameter value

confirmation of parameter value and

switch to the next parameter

See section 7.2.4 and 7.2.6.

+ increase the valued displayed in display value is increased

programming mode

- reduce the valued displayed in display value is reduced

programming mode

7.2.3 Meaning of the symbols on the V810 operating panel

Symbol Function Display

C automatic rpm effective symbol on

only with seam sections

processed automatically

D light barrier switched on symbol on

E sewing drive switched on symbol on

F rpm limit effective symbol on

G bobbin-thread monitor switched on symbol flashes when

bobbin is running out