Instruction manual

7.2 V810 operating panel (optional equipment)

7.2.1 Operating and display elements on the V810 operating panel

7.2.2 key functions on the V810 operating panel

Functions can be turned on and off by briefly pressing the keys on the operating panel.

The functions are effective on machine only if the relevant devices (e.g. magnetic or

electro-pneumatic sewing-foot lift) are present.

Key Function Display

1 double starting bar tack on right arrow above the key on

starting bar tack on both arrows on

single starting bar tack on left arrow above the key on

2 double ending bar tack on right arrow above the key on

ending bar tack on both arrows on

single ending bar tack on left arrow above the key on

3 auto. foot lift on halt in seam on left arrow above the key on

auto. foot lift on halt in seam on left arrow above the key on

auto. foot lift after thread cut on right arrow above the key on

4 basic needle position = down left arrow above the key on

basic needle position = up right arrow above the key on

A suppress bar tack or invoke bar tack no display

if starting or ending bar tack is switched on,

pressing the key switches the next bar tack off

if starting or ending bar tack is switched off,

pressing the key switches the next bar tack on