Instruction manual

6.4 Connection sockets on the DA220C control
6.5 Connecting the DA220C control
–
Plug the set-point generator (pedal) lead into socket B80 of the control.
–
Plug the lead of the motor sensor 2 into socket B2 of the control.
–
Plug the lead 1 of the motor into socket B41 of the control.
–
Plug the machine lead into socket A of the control.
–
Lay all leads through the cable conduit.
–
Plug the lead of the operating panel (optional equipment) into socket B776.
21
GB
1
2
B 7 7 6
V 8 . .
B 1 8
L S M . . .
B 2
M
B 8 0
E B . . .
B 4 1
M
A
B41
B2
A
B80
B776