Instruction manual

5. Sewing drive

5.1 Items supplied

DC1500/DA220C positioning actuator

–

DC1500 motor

–

DA220C control

–

EB301 A set-point generator

–

pedal linkage

–

attachment items

–

V810 operating panel (optional equipment)

–

V820 operating panel (optional equipment)

5.2 Fitting the control

–

Fit the control 8 with 4 screws under the table top 5.

–

Attach the mains cable of the control with its cleat under the table top.

5.3 Fitting the set-point generator

5.3.1 All subclasses except 275-742642

–

Screw on the bracket 2 under the table top 5 (see illustration above left).

–

Screw the set-point generator 3 onto the bracket 2 (see illustration above left).