Instruction manual

7. Sewing

The following preconditions apply to the description of sewing operation:

–

The following functions are set on the operating panel:

starting bar tack: ON ending bar tack: ON

sewing-foot position before and after cutting: DOWN

needle position before cutting: DOWN (position 1)

–

Themainswitchison.

–

The last sewing operation was terminated with an ending bar tack and the thread

being cut.

Sewing: operating and function sequence:

Sewing operation operation / explanation

Before starting sewing

Initial position

Position the material

at the seam start

- Pedal in neutral position.

Machine at a halt.

Needle up, sewing feet down.

- Push pedal back.

The sewing feet rise.

- Position material.

- Release pedal.

The sewing feet descend onto the material.

At the seam start

Starting the seam

Starting the seam without

a star ti n g ba r tac k

- Push pedal forwards and hold it there.

The s tar t i ng b ar tac k i s se wn .

The machine continues sewing at the speed

set by the pedal.

- Press key 1 (suppress bar tacks).

- Push pedal forwards.

- The machine sews at the speed set by the pedal.

12 3