Instruction manual

GB
6.19 Keypad on the machine arm
Depending on the subclass and equipment the following keys and displays are
available:
optional extra
LED/ Function
key
Invoke or suppress starting or ending bar tack.
If starting or ending bar tacks are generally switched on, pressing this key
switches the next one off.
If starting or ending bar tacks are generally switched off, pressing this key
switches the next one on.
Move the needle to the up or down position.
The function of this key is determined with the F-140 parameter (DA 220C).
1 = needle up, 2 = needle up / down, 3 = single stitch)
The factory setting is 1 = needle up.
Manually sewing backwards.
The machine sews backwards for as long as the k ey is held down.
Switching the edge cutter on and off
Switching fullness on and off
yellow LED display: if the LED lights up, the selected function is activated.
green LED display: “sew ing drive sw itched on”
Caution: danger of injury !
When the sewing drive is switched on (the green LED is on) the
foll owin g work may not be carried out:
- threading the needle and looper thread
- changing the bobbin or needle
- adjusting the thread regulator
- all activities within range of moving parts.
29