Instruction manual

6.9 Setting the sewing-foot pressure
The required sewing-foot pressure is set with adjustment wheel 2.
–
Undo locknut 3.
–
To increase the sewing-foot pressure = turn adjustment wheel 2
clockwise.
To reduce the sewing-foot pressure = turn adjustment wheel 2
anti-clockwise.
–
Tighten locknut 3.
CAUTION:
The sewing-foot pressure of the overfeed foot must only be
checked with the overfeed foot in contact with the feeder.
6.10 Setting the overfeed-foot contact pressure
The required pressure for the overfeed foot (grip-feed) is set with adjustment wheel 1.
–
To increase the overfeed-foot pressure = Turn adjustment wheel 1
clockwise.
To reduce the overfeed-foot pressure = Turn adjustment wheel 1
anti-clockwise.
CAUTION:
The sewing-foot pressure and overfeed-foot contact
pressure must only be checked with the overfeed foot in
contact with the feeder.
17
GB
1
2
3