Instruction manual

6.4 Winding on the bobbin thread

Caution: danger of injury

Turn off the main switch.

Threading of the bobbin thread should only be done with

the sewing machine switched off.

–

Place the bobbin on the bobbin-winder shaft 1.

–

Thread the bobbin thread as shown in the illustration.

–

Wind the bobbin thread clockwise onto the bobbin core.

–

Pull the thread end through the cutter clamp 2 and cut.

–

Swivel the bobbin-winder flap 3 against the bobbin.

–

Turn on the main switch.

–

Commence sewing.

–

The bobbin winder automatically switches off when the pre-set quantity of thread

has been wound on (see Servicing instructions).