Operation Manual
Table Of Contents
- 271743-01-Deckblatt
- 271743-02-VoSi -D-
- 271743-03-Inhalt-D-1
- 271743-04-Inhalt-D-2
- 271743-05-VoSi -GB-
- 271743-06-Inhalt-GB-1
- 271743-07-Inhalt-GB-2
- 271743-08-VoSi -F-
- 271743-09-Inhalt-F-1
- 271743-10-Inhalt-F-2
- 271743-11-VoSi -E-
- 271743-12-Inhalt-E-1
- 271743-13-Inhalt-E-2
- 271743-14-VoSi -P-
- 271743-15-Inhalt-P-1
- 271743-16-Inhalt-P-2
- 271743-17-VoSi -I-
- 271743-18-Inhalt-I-1
- 271743-19-Inhalt-I-2
- 271743-Standbogen
8.1.5 Displaying the Current Speed in the DA40MS02 Controls
The current speed can be shown in the display during sewing.
Prerequisites:
–
The display mode 2 is turned on (see Chapter 8.1.2) .
–
The parameter <605> = I (see Chapter 8.1.8).
Display:
Display mode 2: Maximum speed/Current speed
Number Meaning Change via:
1 Character for the speed display -
2 Character for the current speed -
3-6 Stitches-rpm -
8 Current programming level Chapter 8.1.7, 8.1.8, 8.1.9-
GB
53