Operation Manual

7.3.3 Meaning of the Symbols in the V820 Control Panel
Symbol FunctionDisplay
C Abbreviation C for the code number Symbol on, with display of a
code number e.g. C 1907
D Abbreviation F for the parameter number Symbol on, with display of a
parameter number e.g. F - 111
E Program number in the Teach-in mode Symbol on, with display of a
program number of a
sewing program
F Seam run number in the Teach-in mode Symbol on, with display of a
seam run number of a
sewing program
G Run-lock active Symbol blinks with run-lock activated
H Entries via keys blocked Symbol on, when the entry
via the keys is blocked.
I Error message Symbol on. (Error list see
Chapter 7.1.8)
J Entry of the number of stitches Symbol on, with display of the
in the Teach-in Mode number of stitches in a seam run
K Bobbin thread monitor on Symbol blinks by a
bobbin nearing empty
Only by machines with a
bobbin thread monitor.
L Speed limitation active Symbol on, when one of the possible
speed limitations is activated.
M * Right needle turned off Symbol on, when the right
needle bar is turned off.
Only by machines with automatic
turning-off of the needle bars.
N Compensation stitches for light barrier Symbol on
O Machine running Symbol on
P Automatic speed active Symbol on, when, in a sewing
program, a seam run is conducted
automatically with constant speed.
Q * Left needle turned off Symbol on, when the left
needle bar is turned off.
Only by machines with automatic
turning-off of the needle bars.
* These functions are not used by the class 271 - 274.
42