Operation Manual

7.2 V810 Control Panel (Optional Equipment)
7.2.1 Operating and Indicator Elements at the V810 Control Panel
7.2.2 Functions of the Keys at the V 810 Control Panel
It is possible to turn functions on or off by briefly pressing keys at the control panel.
The functions are only then in effect on the machine if the corresponding devices
(e.g. solenoidal or electropneumatic sewing foot lift) are present.
Key Function Display
1 Double beginning bartack on Right arrow above the key on
Beginning bartack off Both arrows off
Single beginning bartack on Left arrow above the key on
2 Double end bartack on Right arrow above the key on
End bartack off Both arrows off
Single end bartack on Left arrow above the key on
3 Auto. foot lift at stop in the seam on Left arrow above the key on
Auto. foot lift at stop in the seam off Left arrow above the key off
Auto. foot lift after thread trimming on Right arrow above the key on
Auto. foot lift after thread trimming off Right arrow above the key off
4 Base position of needle = down Left arrow above the key on
Base position of needle = up Right arrow above the key on
A Bartack suppression or bartack call-up no display
If beginning or end bartack are turned on,
pressing the key will turn off the next
bartack.
If beginning or end bartack are turned off,
pressing the key will turn on the next
bartack.
34