Operation Manual
Table Of Contents
- 271743-01-Deckblatt
- 271743-02-VoSi -D-
- 271743-03-Inhalt-D-1
- 271743-04-Inhalt-D-2
- 271743-05-VoSi -GB-
- 271743-06-Inhalt-GB-1
- 271743-07-Inhalt-GB-2
- 271743-08-VoSi -F-
- 271743-09-Inhalt-F-1
- 271743-10-Inhalt-F-2
- 271743-11-VoSi -E-
- 271743-12-Inhalt-E-1
- 271743-13-Inhalt-E-2
- 271743-14-VoSi -P-
- 271743-15-Inhalt-P-1
- 271743-16-Inhalt-P-2
- 271743-17-VoSi -I-
- 271743-18-Inhalt-I-1
- 271743-19-Inhalt-I-2
- 271743-Standbogen
7.1 Operating and Indicator Elements of the DA220C Controls
Key Function in the sewing mode
(after main switch on)
P Calling up / exiting the programming mode
E Beginning bartack single / double / off
(indicated by LED1 and LED2)
+ End bartack single / double / off (indicated by LED3 and LED4)
- Automatic sewing foot lift at stop in the seam On/Off
(indicated by LED5)
Automatic sewing foot lift after the thread trimming On/Off
(indicated by LED6)
>> Base position of the needle in position 1 (indicated by LED7)
or in position 2 (indicated by LED8)
Key Function in the programming mode
(see Chapter 7.1.1)
P Calling up / exiting the programming mode
E Calling up a parameter value or confirming a change
+ Increase the number or value of the parameter
- Decrease the number or value of the parameter
>> Shift function
P
+
E
> >
LED 1
LED 8
24