Operation Manual
Table Of Contents
- 271743-01-Deckblatt
- 271743-02-VoSi -D-
- 271743-03-Inhalt-D-1
- 271743-04-Inhalt-D-2
- 271743-05-VoSi -GB-
- 271743-06-Inhalt-GB-1
- 271743-07-Inhalt-GB-2
- 271743-08-VoSi -F-
- 271743-09-Inhalt-F-1
- 271743-10-Inhalt-F-2
- 271743-11-VoSi -E-
- 271743-12-Inhalt-E-1
- 271743-13-Inhalt-E-2
- 271743-14-VoSi -P-
- 271743-15-Inhalt-P-1
- 271743-16-Inhalt-P-2
- 271743-17-VoSi -I-
- 271743-18-Inhalt-I-1
- 271743-19-Inhalt-I-2
- 271743-Standbogen
Electropneumatic operation (Class 272 740142)
When the green LED 4 is lit, the machine head is turned on. The three-way switch 3
determines the method of operation of the edge trimmer. At switch position I the edge
trimmer is switched on for normal applications. The switch position II is for the
turning-on of the edge trimmer at greater stitch lengths. At switch position 0 the function
is turned off.
When the yellow LED 2 blinks, the edge trimmer operates after the programmed
number of stitch count (Parameter 259 at the supplier level; Prerequisite: Parameter
255=2). The number of stitch count for the shutting-off of the edge trimmer is
established through parameter 258 at the supplier level.
The yellow LED 1 glows continuously when the edge trimmer is running.
6.15 Setting Dial on the Head Cover (with Class 274 standard
equipment; with Class 273 optional equipment 273 001041)
The lower end position of the sewing foot can be set with the setting dial 5. The setting
range is approx. 0-5 mm.
6.16 Keypad on the Sewing Machine Arm
271-140332
271-140342 272-160362 272-640642 272-740642 273-140342
271-140432 with 272-740642 273-140432
271-140442 0272 590014 274-140342
272-140332 (Multiflex)
272-140342
272-160362
5
234
1
28