Operation Manual

6
1
General
Class 267- with subclasses
1.1
Subclass : 373
Needle system : 134-35
Needle No. : 130
Braided thread Nm : 20/3
References and illustration
1.2
A functional element mentioned in the text gets a reference (e.g. "A") if it is illustrated in the
appendix.
An electrical or pneumatic functional element bears in all technical documentation (e.g. plan of
electrical or pneumatic system) the same reference (e.g. "s1" or "24.2") as that in the text,
preceding the fraction stroke.
In the attached illustration this reference stands in a circle.
Installing the belt guard (see fig. 1 and 2)
1.3
Taking into service
1.4
- Turn on the main switch,
- Lower the presser foot by the lever B,
- For pulling up the bobbin thread, hold the needle thread behind the
presser foot and rotate the machine,
- Lift the presser foot,
- Place both threads backwards and position the material,
- Lower the presser foot,
- Lower the pedal forwards. The machine will operate faster if the
pedal is lowered more (do not push or pull the material),
- Operate machine without material only with lifted presser foot.
After sewing, turn off the main switch.