Operation Manual

7 Sewing
Operating and function sequence when sewing:
Sew ing operation Operating / Explanation
Before the sew ing start
Initial position
Position
the fabric at the seam beginning
- Pedal in idle position.
Sewing machine is idle.
Needle position high.
Sewing foot down.
- Lifting the sewing foot.
- Push the fabric close to the needle.
- Lower the sewing foot.
Sewing
- Step forward on the pedal and hold it stepped.
The machines moves forwards with the speed
determined by the pedal.
In the seam Center
Interrupt the sewing operation
Continue the sewing operation
(after releasing the pedal)
- Release the pedal (position 0) .
The machine stops.
The sewing foot is down.
- Step forward on the pedal
The machine continues sewing with the
speed determined by the pedal.
At the seam end
Remove the fabric
- Step the pedal back completely and hold it stepped.
The final bar is sewn.
The threads are cut.
The needle is in position “high”.
The sewing foot lifts.
- Remove the fabric.
to the front
position 0
halfway back
fully back
28