Operation Manual

Set-up
Operating manual 171/173 Version 01.0 - 01/201662
6.9 Fitting the control panel for the controller
For machines with the DAC classic controller, the OP 1000 control
panel must be fitted.
Fig. 40: Fitting the control panel - Part 1
1. Loosen the 3 fastening screws of the arm cover (3)
and remove the arm cover (3).
2. Remove the handwheel (1) and handwheel cover (2).
3. Screw the control panel (5) firmly onto the control panel bracket (4).
Fig. 41: Fitting the control panel - Part 2
4. Secure the control panel bracket to the arm cover using
the arm cover fastening screws (6).
5. Position the arm cover including control panel.
(1) - Handwheel
(2) - Handwheel cover
(3) - Arm cover
(4) - Control panel bracket
(5) - Control panel
①
②③ ④ ⑤
(6) - Arm cover fastening screws
⑥