Operation Manual

Operation
Operating manual 171/173 Version 01.0 - 01/201644
START OF SEWING
Initial position
1. Switch on the sewing machine.
2. Pedal position 0:
 Machine stationary, needles up, sewing foot down.
Positioning the sewing material
1. Press the foot pedal half-way back to
pedal position -1:
 The sewing foot is raised.
2. Push the sewing material into the initial position.
3. Release the foot pedal to pedal position 0.
 The sewing foot lowers onto the sewing material.
To start sewing
1. Press the foot pedal forwards to pedal position +1:
 The machine sews. The sewing speed increases
the further forward the pedal is pressed.
WHEN SEWING
To interrupt sewing
1. Release the foot pedal to pedal position 0:
 The machine stops, needles and sewing foot are down.
To continue sewing
1. Press the foot pedal forwards to pedal position +1:
 The machine continues to sew.
END OF SEWING
To finish sewing
1. Press the foot pedal back co
mpletely to pedal position -2
and hold it there.
The thread is cut.
The machine stops.
Needle and sewing foot are raised.
2. Remove the sewing material.