Operation Manual

6 Putting into operation

6.1 Sewing test

A sewing test should be performed once the setting up job has ended.

–

Connect the mains plug.

Caution: Risk of Injury!

Switch off the main switch.

Thread the needle and looper thread only when the sewing unit is

switched off.

–

Thread the needle and looper thread

(see operating instructions of the sewing machine head).

–

Switch on the main s witch.

The control unit is initialised.

–

Select the sewing programme.

–

Positioning and operating are described in Part 1: Operating

Instructions 1281/5-1.