Operation Manual

–
External control panel Efka V850 with:
- Menu navigation
- Freely programmable parameters for
“Differential bottom feed (optional)”, “Needle feed
(optional)” “Machine parameters”, “Global parameters”,
“Program sequences”
- Input and output tests
- Check routine for step motors
- 20 program storage locations
- up to 7 seam programs per program storage location
–
Vertical cutter with suction for overlocking and serging in one
operation
–
Chain separator with suction, programmable
–
Adjustable blowing nozzles in the table top for supporting the
material feed, mechanical regulation of the blowing intensity by an
adjusting knob, duration of table blowing programmable
–
Deposit table for trousers parts
–
Special sewing equipment for trousers side seams with side seam
pockets and wing pockets
–
Height-adjustable stand, infinitely variable from 815 mm to 1200
mm
–
Automatic fullness distribution by step motor-controlled needle and
bottom feed (optional)
–
Integrated stacking device
–
Manual stacking via shortcut key
–
Light-barrier for recognizing the seam beginning and seam end
selectable via key
1.3 Technical data:
Machine head: Pegasus EXT 3216-03
Stitch type: 401, 515, 516
Number of needles: 1 or 2
Needle system: B27
Needle size: Nm 80 to Nm 110
Hook type: Chainstitch hook, cross-line, overlock hook
Threads: see table chapter 4.2
Speed: 6500 r/ min
Speed upon
delivery: 6500 r/ min
Stitch length: min. 0.5 mm
max. 3.5 mm
Seam width: 10 mm
Optional: 8 - 12 mm
Material: Light to medium-weight material
Operating pressure: 6 bar
Air consumption: 20 NL per working cycle
Rated voltage: 1 x 230 V 50/60 Hz
Rated load: 0.95 kVA
Dimensions: 1800 x 1200 x 1500 mm (L x W x H)
Working height: 815...1200 mm
(upper table top edge)
Weight: 115 kg
4