Operation Manual

Index Page:
Preface and general safety instructions
Part 1: Operating instructions cl. 1280/5
1. Description of product
1.1 Description of proper use ......................................... 3
1.2 Brief description ............................................... 3
1.3 Technical data ................................................ 4
2. Optional equipment
3. Switching on - Switching off - Program stop
3.1 Switching on ................................................. 6
3.2 Switching off ................................................. 6
3.3 Program stop ................................................ 7
3.4 Restart after program stop ........................................ 7
4. Operation of the sewing machine head
4.1 General notes ................................................ 8
4.2 Recommended threads .......................................... 9
4.3 Removing/ Putting on the fabric sliding sheet ............................. 10
5. Operation of the engineered sewing station
5.1 Feeding the workpieces and starting the sewing process ...................... 11
5.2 Adjusting the blowing air for the nozzles in the table top ...................... 12
5.3 Setting of needle feed, bottom feed and differential feed ...................... 13
5.3.1 Needle feed, bottom feed and differential feed of sewing stations with cylinder ........ 13
5.3.2 Needle feed, bottom feed and differential feed of sewing stations with step motors...... 14
5.4 Contour guide via knee switch ...................................... 14
5.5 Stacker .................................................... 15
6. Operation of the control
6.1 Operator terminal .............................................. 16
6.2 User interface ................................................ 18
6.2.1 Menu structure of the sewing and setting programs ......................... 18
6.3 Seam programs ............................................... 20
6.4 Setting the control ............................................. 22
6.4.1 Altering seam-specific parameters.................................... 23
6.4.2 Altering global parameters ........................................ 28
6.4.3 Input - Output test.............................................. 29
6.4.4 Creation of seam programs ........................................ 30
6.4.5 Deleting a seam program ......................................... 31
6.4.6 Altering seam programs (Changing/Completing the sequence) .................. 31
1