Operation Manual

Key 8 Input- Output test

Key 9 Creation of programs / Creation of sequences

Key 0 Set global parameters

Calling up sewing programs

–

Switch the main switch on.

The control initializes.

The seam program previously used is loaded.

–

Press one of the keys “1, 2, 3, 4, 5, 6, 7, 8, 9, 0”.

The selected seam program is loaded.

Calling up the parameter menu

–

Switch the main switch on.

The control initializes.

The previously used program appears in the display.

–

Press key “P”.

The selection menu is called up.

–

Press one of the keys “1, 2, 3, 4, 5, 6, 7, 8, 9, 0”.

The display changes over to the corresponding function.

Contour guide forward / backward

When the seam program is selected:

–

Press key “F1”.

The contour guide moves forward.

–

Press key “F1”anew.

The contour guide moves backward again.

Manual stacking

When the seam program is selected:

–

Press key “F2”.

The stacker makes a stacking movement.