Operation Manual

5.3.2 Needle feed, bottom feed and differential feed of sewing stations with step motors

Needle and bottom feed can be adapted to the sewing conditions via

the potentiometer 1 at any time.

You can determine via the control parameters which feed is changed

by the potentiometer 1.

Setting needle feed and bottom feed

–

Make the corresponding settings in the control in the menu

“Seam-specific parameters”.

–

Set the potentiometer 1 correspondingly.

Setting range: + 0 to 6 right

- 0 to 6 left

5.4 Contour guide via knee switch (optional equipment)

Via the knee switch 1 the contour guide can be retracted or extended

while sewing.

–

Actuate knee switch 1 while sewing.

The contour guide is retracted.

–

Press knee switch 1 anew.

The contour guide is extended again.