Operation Manual

3.5 M oun ting and alig ning the sta cker

3.5.1 M oun ting the throw -over sta cker

–

Approach the stacker with the holder 4 to the sew ing unit.

–

Screw the holder 4 on the sew ing unit with two screw s 5.

–

Align the stacker in such a way that the sm oother 6 is in parallel

position to the edge of the table top 7.

–

Tighten screw s 5.

–

Screw earth wire 2 on the stacker.

–

Attach the com pressed air lines 1 and 3 to the distributor.

5 4 3 2 1 7 6