Operation Manual

3.2Adjusting the contourguide

Caution:Risk ofinjury!

Switch the m ainswitch off.

Adjustthe contourguide onlywiththe sew ing unitsw itched off.

1.Q uick adjustm entofheight

The rough setting ofthe m aterialthickness is setand read offatthe

setting w heel2.4 steps are available.

Step1=0.8mm

Step2=1.6mm

Step3=2.4mm

Step4=3.2mm

–

Setthe desire d m a terialthickness atthe setting w heel2.

2.Fine adjustm entofheight

The presetting viathe quick adjustm entofheight2 is readjusted by the

fine adjustm entofheight1.

Standard

The sliding plate3ofthe contourguide shouldbelow ered as m uch as

possible.The fabric shouldslide underneaththe sliding plate as easily

as possible.

–

Push the fabric underthe sliding plate.

–

Actuate outputY 3 tolow erthe sliding plate.

–

Turn the setting screw 1 counte r-c lockw ise untilthe sliding plate

re s tsonthe fabric.

–

C heck w hetherthe fabricis easy-gliding.Forthis purpose guide

the fabric underneaththe sliding plate.