Operation Manual

Set-up

Operating manual 100-69 version 00.0 - 05/2013

6.9 Installation of the software

Fig. 60: Connecting the USB flash drive

1. Switch off the sewing unit.

2. Insert the USB flash drive vertically into the control panel.

3. Switch on the sewing unit.

4. Change to the menu DAC-Update.

 This screen will be displayed:

Fig. 61: Message display

5. Press the OK button.

 This screen will be displayed:

Material damage!

During the loading process do not remove the USB flash drive and

do not switch off the machine (otherwise you will destroy the soft-

ware).

ATTENTION