Operation Manual

Set-up

Operating manual 100-69 version 00.0 - 05/2013

Stand

with castors

For in-house transport the stand can be equipped with four castors.

Fig. 46: Stand with castors

Rolling the sewing unit (optional)

1. For transport purposes unfasten the nuts (1) of the stand feet (2) and

screw in the stand feet (2).

2. After transport secure the sewing unit by turning the stand feet (2) out

until the castors lift off the ground (3).

3. Tighten the nuts (1).

6.2.2 Removing the transport securing devices

Before installing the sewing unit, you have to remove all the securing de-

vices.

All movable parts have to be unlatched.

• Transport carriage

• Plate depending on sewing method

• Corner knife station

• Feeding device

• Extensions like f. e. stacker

If the sewing unit has to be transported to another place, you have to at-

tach the securing devices again.

Before removing/fixing the security devices, please consult the supple-

mentary sheet delivered with the machine.

(1) - Nuts

(2) - Stand feet

(3) - Castors

཰

ི

ཱ