Operation Manual

Operation
Operating manual 100-69 version 00.0 - 05/2013
57
5.12.2 Oil level control
For filling up the oil reservoirs use nothing but DA 10 lubricating oil or an
equivalent oil with the following specification:
• Viscosity at 40° C: 10 mm
2
/s
• Ignition point: 150° C
DA 10 is available from the DÜRKOPP ADLER AG sales offices under the
following parts numbers:
Fig. 44: Checking the oil level
Checking the oil level for the lubrication of the machine head
The oil level in the oil reservoir (2) must not drop below the marking “Min”.
If necessary, fill oil through the drill-hole (1) up to the upper marking "Max".
Amount Parts number
250- ml container 9047 000011
1-liter container 9047 000012
2-liter container 9047 000013
5-liter container 9047 000014
(1) - Drill-hole (2) - Oil reservoir
཰
ཱ