Operation Manual

Operation

Operating manual 100-69 version 00.0 - 05/2013

Switching the blow-out device on

• Switch on the blow-out device in the menu item “Seam parameters”,

 Programming Instructions.

Note:

The blower pipe continues blowing until the light barrier at the stapler con-

trol is free.

5.11.7 Bundle clamp

The bundle clamp including the positioning table is designed for the pro-

duction of trousers. The bundles are deposited on the table and stuck in

the bundle clamp. After sewing they are removed with the smoother or the

blow-out device and drop down while being held by the bundle clamp.

In order to optimize the bundle array, a smoother device (produced on

customer demand) can be deployed.

Caution: Danger of injury!

Risk of suffering bruising between the arms of the

bundle clamps.

WARNING