Operation Manual

Operation
Operating manual 100-69 version 00.0 - 05/2013
52
Function
Fig. 39: Transport rollers of the stacker
• With the lifting of the feeding clamps after the sewing and cutting
sequence, the transport rollers (1) lower.
• The transport rollers (1) convey the small workpiece into the stacker
opening.
• The stacking process follows.
5.11.6 Blow-out device
The blow-out device (1) is used in conjunction with the bundle clamp. The
blower pipe conveys the workpiece out of the sewing area.
Fig. 40: Blow-out device
(1) - Transport rollers
཰
(1) - Blow-out device
཰