Operation Manual

Operation

Operating manual 100-69 version 00.0 - 05/2013

Throw-over

stacker

The finished workpieces are stacked on the throw-over stacker.

The stacked and clamped workpieces can be removed when actuating the

foot switch.

The throw-over stacker is driven by a trigger and controlled automatically.

Activate the stacker:

• Activate the throw-over stacker via the control panel in the menu

"machine parameters",  Programming Instructions. The parame-

ter signals to the control unit that the sewing unit is equipped with a

throw-over stacker.

Switching the stacker on

• Switch on the throw-over stacker in the menu "Pocket parameters",

 Programming Instructions.

Fig. 37: Throw-over stacker locked

཰

ཱུ

ུ

ཱི

ི

ཱ

(1) - Smoother

(2) - Clamping pipe

(3) - Clamping pipe

(4) - Stacked goods stand

(5) - Holder

(6) - Foot pedal