Operation Manual

Operation
Operating manual 100-69 version 00.0 - 05/2013
48
Switching the stacker on
• Switch on the grip stacker in the menu "Pocket parameters",
 Programming Instructions.
Basic position
1. Stacker shackle (1) at the front, stacker grip (2) open.
The opened stacker grip (2) should be positioned 20-25 mm in front of
the table top, so that the workpieces can be passed.
2. With the stop signal the stacker grip (2) moves to the front and seizes
the workpiece.
3. The stacker shackle (1) swings to the back and pulls the workpiece off
the table.
4. Set the movement of the stacker shackle (1) with the throttles so that it
moves smoothly without jerk.
5. The stacker grip (2) opens.
6. The workpiece is deposited on top of the stacker board (3).
The stacker board hight has to be set in a way that allows for a safe de-
positing of the workpiece.
7. The stacker shackle (1) swings to the front.
Fig. 36: Grip stacker
(1) - Stacker shackle
(2) - Stacker grip
(3) - Stacker board
཰ཱི