Operation Manual

Operation
Operating manual 100-69 version 00.0 - 05/2013
40
1. Press the EMERGENCY-stop.
A reference run is started.
The transport carriage stops in its rear end position.
2. The display changes to the main screen of the sewing unit.
5.9.3 Starting the sewing cycle
1. Actuate the left foot switch.
By actuating the central foot switch repeatedly the different steps of the
feeding process are started one after the other. The individual steps
depend on the working method and on the equipment of the sewing unit.
For positioning correction:
Actuate the right foot switch or press the reset key.
The last step of the positioning process is undone.
The workpiece can be fed anew.
2. Step the central foot switch to the front.
The sewing procedure is started.
5.9.4 EMERGENCY stop
For an immediate switch-off of the sewing unit in case of operating errors,
needle breakage, material accumulation etc. the safety system of the
100-69 will react as follows:
1. Press the EMERGENCY-stop (1).
The sewing process is stopped immediately.
Fig. 26: EMERGENCY stop
(1) - EMERGENCY-stop
཰