Operation Manual

Operation
Operating manual 100-69 version 00.0 - 05/2013
24
A detailed description of the alignment of the different types of piping
on the feeding clamp follows.
See “Positioning of piping strips”.
3. Actuate the central foot switch.
The folder (6) lowers.
4. Actuate the central pedal once again.
The sewing cycle starts.
5.1.2 Working method “Breast welt pocket"
Sewing patterned or plain goods
When processing plain goods without pattern it is not necessary to align
jacket front part and breast welt as per pattern.
This results in a faster working method for plain goods.
• Aligning the positioning aids
Positioning method
Example: Men's jacket front part with breast welt pocket, patterned
Fig. 6: Breast welt pocket 1st step
1st step:
1. Select pocket program No. 7 at the control panel.
2. Position breast welt (2) on the jacket front as per the stripes.
3. Align the breast welt of the jacket front at the laser markings (1) and (3)
(right and transversal laser).
4. Step on the start pedal.
The vacuum is switched on.
The jacket front is aspirated.
(1) - Laser marking
(2) - Breast welt
(3) - Laser marking
཰
ི
ཱ