Operation Manual

Safety instructions
Operating manual 100-69 version 00.0 - 05/2013
15
3 Safety instructions
This section contains basic instructions for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to
follow the information included in the safety instructions. Failure to do this
can result in serious injury and damage to the machine.
3.1 Basic safety instructions
The machine may only be used as described in this operating manual.
The operating manual must be available at the machine's location at all
times.
Work on live components and equipment is prohibited. Exceptions are de-
fined in the specifications in DIN VDE 0105.
For the following work, the machine must be disconnected from the power
supply using the main switch or by disconnecting the power plug:
Replacing the needle or other sewing tools
Leaving the workplace
Performing maintenance work and repairs
Incorrect or defective spare parts could impair safety and damage the ma-
chine. Therefore only use original spare parts from the manufacturer.
Transportation When the machine is being transported, use a lifting carriage or a forklift.
Raise the machine max. 20 mm and secure it against slipping off.
Set-up The connecting cable must have a power plug approved in the specific
country. The power plug may only be connected to the power cable by a
qualified specialist.
Operator's
obligations
Observe the country-specific safety and accident prevention regulations
and the legal regulations concerning industrial safety and the protection of
the environment .
All warnings and safety signs on the machine must always be in legible
condition and must not be removed. Missing or damaged labels have to
be replaced immediately.