Operation Manual

3.2 Parallelism of the transport clamps

Caution: Risk of injury!

Switch the main switch off.

Check and adjust the parallelism of the transport clamps only with the

sewing unit switched off.

standard and checking

The transport clamps 1 and 2 should run parallel to the edge of the

sliding sheet 3.

–

Push the transport carriage to the front.

–

Check the distance of the transport clamps to the edge of the

sliding sheet.

Correction

–

Loosen the screws 4 and 6.

–

Adjust the transport clamps with the screws 5 so that they are in

parallel position to the edge of the sliding sheet.

–

Tighten the screws 4 and 6.

321 654