Operation Manual

6.6.2.4 Testing the ejector roller

With this program the function of the ejector roller is tested.

–

Tap the icon “ejector roller speed”.

The numeric pad appears.

–

Enter the desired speed via the numeric keypad.

–

Tap the icon “OK”.

–

Tap the icon “ejector roller time”.

The numeric pad appears.

–

Enter the desired time via the numeric keypad.

–

Tap the icon “OK”.

–

Tap the icon “ON”.

The motor of the ejector roller runs.

–

Tap the icon “OFF”.

The motor of the ejector roller stops.

–

Tap the icon.

The ejector roller lowers, rotates for the time set and returns to its

initial position.

–

Tap the function key ESC to quit the test program.