Operation Manual

6.6.2.3 Testing the centre knife

With this program the centre knife drive can be tested.

–

Tap the icon “centre knife test”.

The numeric pad appears.

–

Enter the desired speed in % via the numeric keypad (standard =

40 %).

–

Tap the icon “OK”.

–

Tap the icon “ON”.

The motor runs at the entered speed.

–

Tap the icon “knife”.

The cylinder presses the knife into the cutting position.

–

Tap the icon “OFF”.

The motor stops.

–

Tap the function key ESC to quit the test program.