Operation Manual

Testing output elements

–

Change between the basic module and the CAN node with the icon

“CAN”.

Y1 or Y101 is displayed.

–

Select the desired output with the icon “+” / “-”.

–

Tap on icon “Y1” or “Y101”.

–

Enter the code number of the desired output element (see tables).

–

Tap the key “OK”.

The output element is switched on.

The display 1 shows a “+”.

–

Tap the key “OFF”.

The input element is switched off.

The display 1 shows a “-”.

–

Actuate the key “Auto”.

The output element is red-shadowed and actuated in interval

mode.

Output elements machine head unit (DAC3-X120b)

Valve Designation

Y1 Needle thread catcher

Y2 Centre knife impulse

Y3 Centre knife tappet

Y5 Bobbin thread trimmer

Y6 Thread lifting

Y7 Needle disengagement, left

Y8 Needle disengagement, right